Make and model
Pedal PCB - Tyrian Overdrive (Revv G3 Clone)
Description
Huge Thanks goes out to Danimae Vossen for helping me train these models and to Steve Ack for feedback on getting a better model when training. Here's 3 packs based on the 3 Aggression modes of the Pedal PCB Tyrian distortion, the off position has lower gain and no EQ changes. All captured with Vol @ 1:00 Low Gain @ 9:00 (any lower and the red/blue doesn't sound too great) Mid Gain @ 12:00 Hi Gain @ 1:30ish (any higher the high eq gets squealy and Drive gets mushy) EQ doesn't interact with itself too much other than purely lowering/raising its set frequencies, so I captured many different settings to hopefully work with whatever model/ amp sim you're using. The pedal is pretty dependent on the Clean amp you are using. Signal Chain: Audient ID14 Main Out DIYRE L2A Passive Reamplifier Tyrian Distortion Radial J48 (-15 Pad) Audient ID 14 Balanced In Standard 400 epochs Fit_cab True /Cab Modeling Turned on (helps get the highs right) Reamp chain wasn't calibrated accurately, matched the DI of v3_0_0.wav through my chain before capturing, learnt how to calibrate after and tested with what I had recorded with before moving the gain knob on my interface and it's close.
Tags
License
Tone Hunt:The user may download and load the data file into software, and utilize or publish the outputs from said software resulting from use of the aforementioned data file without royalty or restriction. The user may not upload, or otherwise republish, or distribute the data file without express permission from the author of the aforementioned data file.
* NAM Online is an external 3rd party service/website not related with Tonehunt. For support, please visit their website at https://thenam.online
