Make and model
Marshall JCM800 2203
Description
These captures are made on my 1984 JCM800 2203 The amp has had a couple of mods, including a gain mod adding a little more pre-amp gain than stock versions. I dialled in the amp on the high input and did a set of captures increasing the pre-amp (gain) in 0.5 step increments. I've posted a set like this before but the reamp level was way lower (-3dBu) in my previous set. These updates models are calibrated for 11.6 dBu inputlevel. That may help for people knowing their interfaces dBu levels to compensate input in NAM to get an accurate representation of how the amp sounded when I captured it. For people not knowing their interface dBu input level this set should get in the ballpark of what I was capturing more easily, probably requiring less drastic level compensation in NAM to get accurate results. I referenced the captures using greenback IR's mostly. York Audio and also Ownhammer. I hope you enjoy these. If you like to boost with a Boss SD-1 try these: https://tonehunt.org/Jesco/a5ea17da-9568-456c-a2b8-871a2c0f4486 Of course as always free to download, play and enjoy! However, if you like my effort on this and/or my other uploads and considering a donation you can do so by visiting: https://www.paypal.me/FLami1980
License
Tone Hunt:The user may download and load the data file into software, and utilize or publish the outputs from said software resulting from use of the aforementioned data file without royalty or restriction. The user may not upload, or otherwise republish, or distribute the data file without express permission from the author of the aforementioned data file.
* NAM Online is an external 3rd party service/website not related with Tonehunt. For support, please visit their website at https://thenam.online
