Make and model
NSH TM-1 Prototype 2
Description
The TM-1 is a "kitchen sink" boost/overdrive pedal with 3 different clipping varieties and three different frequency response curves. I made this pedal to use as a "make better" device for various amps and it really needs to be adjusted to what it's plugged into, which is slightly more difficult with a digital facsimile than the real thing. I have tried to cover some ground with these captures, though - the ones with designation "G0" are meant for boosting darker high gain amplifiers to pull the carpet off. The ones with "G3" and "G4" are higher gain and can be useful for boosting amps like Plexis and Ac30s and such. The "TS", "11" and "RT" designators are different boost frequency curves, where "TS" is roughly comparable to the quacky green pedal, but with a little more meat in the low mids. "11" is a little brighter with its peak around 1k, and "RT" has its peak in the 1,3 - 1,6kHz range. "SIL" and "LED" refer to the type of clipping diode used. The "SIL" models are more compressed, and the "LED" ones have higher output and less compression. The "Clean" capture is a clean boost without cllipping diodes in the circuit and a flatter frequency response with just a little boost in the mids.
License
CC BY-NC-SA:This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.
* NAM Online is an external 3rd party service/website not related with Tonehunt. For support, please visit their website at https://thenam.online