Custom 2x10 with Celestion Vintage 10 IR Collection

36 irs
3 months ago
Make and model

Custom 2x10 with V10


IRs made from my custom-built, small-size 2x10 closed-back cabinet made of lightweight 3/4" kiln dried pine. It is loaded with two 8ohm Celestion Vintage 10 speakers mounted diagonally and wired in parallel. Please note, these are the original 20+year old VINTAGE 10 speakers, NOT the modern "V10" speakers. Four different close mics were used to capture both the upper and lower speakers; R121, SM57, MD421, and i5, mic'd in the following positions: -Cap=center of the cap -Cap Edge=edge of the cap where it meets the cone -Cone=midpoint of the cone halfway between cap and cone edge -Cone Edge=edge of the cone right next to the baffle Two distant mics were also used; C414, and M160, both mic'd at the center of the cabinet at distances of 12" and 24" Mics were powered by Universal Audio 2-610 mic pres, passed through HCL Varis Tube Vari-Mu compressor for color, and into RME Fireface converters. Captured using 10 second sine wave sweep @24bit/48kHz December 2023


Tone Hunt:The user may download and load the data file into software, and utilize or publish the outputs from said software resulting from use of the aforementioned data file without royalty or restriction. The user may not upload, or otherwise republish, or distribute the data file without express permission from the author of the aforementioned data file.

* NAM Online is an external 3rd party service/website not related with Tonehunt. For support, please visit their website at

Sign up for our newsletter.

Stay tuned with our latest updates, models, articles, events and much more!

We care about your data. Read our privacy policy.

Support us through BuyMeACoffee