ToneHunt

Make and model

Framus - Cobra

Description

Arlington Audio - Neural Amp Modeler pack ------------------------------------------ Used by Ville Friman of Insomnium, Luke Kilpatrick of Parkway Drive, JB Brubaker of August Burns Red and perhaps most famously by Killswitch Engage, the Framus Cobra can be described as a German Rectifier. Much like a Rectifier, they can be painful to dial in but once you get the sound, you'll know it. To my ear, it's a little softer in the high end but that bottom is there and it's REALLY easy to overdo it! While the amp itself sounds pretty awesome, I liked to boost the lows and highs in NAM to get more depth and presence than the amp is capable of on its own. In that configuration, it's imbued with the rhythmic chug of a Recto with the grind of a 5150 and a modern sound of its own. I'd like to thank Callum Brown for the lend of this amplifier. Though we hadn't met before, he allowed me to borrow the amp for a day to create this library so he could keep a digital version of the amp and allow me to share it with the community. That act of trust and generosity should be recognised and not taken for granted. Clean Bass: 4 - Mids: 8.1 - High: 8 - Presence: 8.2 - Deep:4.5 - Volume: 4 - Master:5 Crunch Bass: 4 - Mids: 5.5 - High: 10 - Presence: 10 - Deep: 3.5 - Volume: 10 - Master: 3 Lead Bass: 3 - Mids: 4 - High: 10 - Presence: 10 - Deep:2 - Volume: 10 - Master:4 Technical details: Captures: 76 @ 1000 Epochs per capture. Amp: Framus Cobra Channels: Clean, Crunch, Lead Peak: ~3.5db (average) Load Box: Suhr Reactive Load Interface: RME Fireface UFXII Preamp: Golden Age Pre73 MKIII Reamp Box: Radial Pro RMP (Level modified) Referenced with Event Opal monitors, Sonarworks and Jens Bogren impulse responses (not included) Stuff people have requested: -10dBFS sine tone at 400Hz from DAW -> AC RMS reading of **2.15v** at the 1/4" plug after reamp box. 10^(-10/20) = 0.3162 **2.15**/0.3162 = 6.799 20log(6.799/0.775) = **18.86 dBu** If your interface has 12dBu instrument inputs: 18.86-12 = 6.86, you have to LOWER the input in NAM Plugin to -6.86 dB for the capture to sound correct. While I offer my libraries for free, donations would be appreciated and will go towards expanding this library https://paypal.me/arlingtonaudio

Preview