Mesa Boogie Badlander Rectifier 100W EL34 (send 22.903 dBu / return 13.303 dBu) - SignalArt reamp
Make and model
Mesa Boogie Badlander Rectifier 100W EL34
Description
If you like my work & want to support it, you can do so here: https://paypal.me/2dorNAM Ladies & gentlemen - the Mesa Boogie Badlander Rectifier 100W (EL34) Trained with NAM v0.10.0 using the new methodology Steve published: https://neural-amp-modeler.readthedocs.io/en/latest/tutorials/calibration.html • SEND level: 22.903 dBu (10.82 V) • RETURN level: 13.303 dBu No need to worry about the above values (SEND / RETURN) anymore - just use NAM plugin v0.7.12 (or later) with the "Calibrate Input" feature. Key in your input headroom / maximum input gain inside the "Calibrate Input" textbox and the NAM plugin will do all the math to get profiles to behave as if you were plugging into the real gear itself. Reamp chain details: -------------------- • RME Fireface UCX II -> SignalArt reamp box -> Mesa Badlander 100W -> St.Rock React:IR II -> RME Fireface UCX II Additional details: ------------------- • 111 profiles (full Amp head, Preamp only & Poweramp only) included at various settings • Legendary Tones Mr. Scary Mod included • Mix of my own settings, settings from the Mesa manual as well as from other artists (Mark Morton, Ola), YouTubers (Kyle Bull, Blake Mansfield) and some forum folks (PaisleyWookiee). • A spreadsheet / guide to understanding how each profile was dialed & the source of inspiration: https://mega.nz/file/GkgiVKLA#B9a9PeMYsqag5CqT2-TpaX4O19_dNggcaDQSwee4U8g • AMP (full amp head) & POW (poweramp) profiles are direct; you need to use an IR of your choice • All profiles use the STANDARD architecture - they will run on the Dimehead NAM player • ESR graphs available here (most are below the established "Great" accuracy threshold; the rest are as close as the STANDARD NAM architecture allows it to be): https://mega.nz/folder/voIBkZwY#qe0wLzjOfdWsUbl87ynBKw • All amp settings were reamped twice: through the "Signal Art" as well as the "Lehle P-SPLIT III". • The leading "S-" in the profile name indicates the "Signal Art" reamp box was used. The "Lehle P-SPLIT III" profile pack will use "L-" !!! ATTENTION, NERDS !!! (yes, that's YOU if you've made it this far): ---------------------------------------------------------------------- • Use the [CabMatch] impulse responses I included to adjust the frequency response of the profiles to my Mesa 2x12, Mesa 4x12 or both of them hooked up to the Badlander • You still need a regular speaker IR after these • These IRs cover all power ratings (20W, 50W and 100W) across both BOLD and VARIAC modes • To those familiar with the Fractal units, this is somewhat similar to adjusting the "Speaker Impedance Curve" in the AMP block. I will release the "Lehle P-SPLIT III" reamped versions of all these profiles soon.
Preview
Tags
License
Tone Hunt:The user may download and load the data file into software, and utilize or publish the outputs from said software resulting from use of the aforementioned data file without royalty or restriction. The user may not upload, or otherwise republish, or distribute the data file without express permission from the author of the aforementioned data file.
* NAM Online is an external 3rd party service/website not related with Tonehunt. For support, please visit their website at https://thenam.online